Milling of foundations - Milling of flanges with diameter 35.000mm

On-site Recovery by milling of two flanges with diameter 22.000mm and 35.000mm in two levels, 185mm between and with a max. level tolerance 1,50mm total round. The machining is finish and there is a level tolerance better than 1,25mm total round.

The total time for laser-alignment and machining by milling was 15 days and nights.

milling_customized
milling_customized_1
milling_customized_2

Milling of surface for the tools in a 2500-ton press

In-Situ milling of a 2500 ton press (1400 x 1600mm)